Garmin watches are popular for their robust practicality, able to guide the wearer on any kind of outdoor adventure. The GPS and activity tracker capabilities of the Garmin models makes them a popular choice for sports enthusiasts. These watches a great addition to any workout routine whether it be that of a seasoned runner, or someone who has only just started their fitness journey. Whilst there are multiple Garmin models that do allow for some self-expression, the best way to personalise a Garmin watch is by changing the strap. If you are looking to change a Garmin watch strap, keeping reading for our guide on how to change a Garmin watch strap.
The Types of Garmin Watch Strap
Garmin offer a variety of straps, with the type depending on the watch model. This range of choice allows the individual to make a decision based on their personal preferences and lifestyle. Some straps are easier to change than others, making those models more suited to an individual who likes to adjust their watch daily to coordinate with their outfits. Personalisation is key to daily accessorising as it allows for a unique and distinctive look, allowing the wearer to stand out. Garmin straps come in a range of sizes to ensure that each model is adjustable and possible to personalise.
Screw-in Watch Straps
Some Garmin models use screw-in watch bands. This type of strap tends to be found on the older Garmin models and is a commonly used fastening amongst a large variety of watch manufacturers. In order to remove and change these straps, a screwdriver will be required. The screwdriver will need to be used to loosen the screws that are positioned either side of the lugs in order to remove the strap. It is recommended to keep the screws with the band that has been removed so that they can be reused when the strap is attached to the watch again. The new band will come with new screws. To attach the new strap, it ought to be lined up with the lugs and the screws fastened. The new strap will now be ready to wear.
Quick Release Bands
This kind of Garmin strap is much quicker and easier to change than the screw-in watch straps. They also have the advantage of not needing any tools to be swapped. These straps will have a ‘quick release’ pin that can be found on the underside of the band. The pin should be pulled back along the spring bar, releasing the strap. The old strap can then be removed and the new one installed. In order to attach the new strap, one side of the strap should be aligned with the lugs. Then the quick release pin can be pulled back. Once the pin is aligned with the correct position on the lug, it can be released and will click into place. The band locks into place automatically, ensuring for a secure and comfortable fit. This process can then be repeated to change the other half of the band.
QuickFit Bands
Garmin’s QuickFit watch straps are the simplest ones to change and swap out, making the models that use this type of band the easiest to personalise. To change this kind of strap, it is necessary to pull down on the quick release lever, and then the watch strap will come unattached. To attach the new QuickFit band, the strap needs to be lined up with the watch and pushed into place. To check that the strap is secure, it is advised to double check that the latch has closed over the watch pin. This process should be repeated on the other half of the strap to change it.
Recommendations
Garmin Fenix 6 Pro Sapphire | Carbon Grey DLC | Black Rubber Strap 010–02158-11
Black is an optimal colour choice to ensure that this watch model will match any strap that it is paired with. This model features a black fibre-reinforced polymer case with a black diamond-like carbon coated steel bezel. The lens is made of scratch-resistant sapphire glass to ensure that this model will be able to withstand any knocks and bumps it will encounter during challenging adventures. The watch can serve as a wrist-based heart rate and Pulse Ox sensor to give the wearer insight into their personal health statistics. The Dynamic PacePro feature will aid the runner to be smarter with their runs and guide them over various kinds of terrain. This watch is capable of measuring running and cycling performance. It can also track strength training, yoga, rowing, swimming, and many more kinds of activity. The watch is water-resistant up to 10 ATM, making it suitable for swimming and some water-based activity. This model uses GPS, Garmin Elevate Wrist HR, a barometric altimeter, compass, gyroscope, accelerometer and thermometer to give the most accurate statistics possible. With a battery life of up to 14 days, this model is long-lasting and reliable. The watch is finished with a black rubber strap, but this strap can be changed for any other compatible QuickFit band option.
Garmin Instinct Solar GPS Flame Red Rubber Strap 010-02293-20
This bold, flame red model will make an eye-catching addition to any outfit. The most integral feature of this watch is the unprecedented battery life. The battery will last up to 24 days in smartwatch mode. This will extend to 54 days in solar battery saver watch mode. The watch is built to be able to endure challenging situations with a fibre-reinforced polymer case and chemically strengthened, scratch resistant Corning Gorilla glass. This model is built to the U.S. military standard 810 for thermal, shock and water resistance. There are a variety of activity profiles, including surfing, swimming, biking, rowing, running and strength training, in order to make it useful for a wide range of people. The flame red case will match a range of compatible QuickFit straps, allowing a variety of looks to be creating using only one watch.
Garmin Vivomove 3 Style | Light Gold Aluminium Case | Pink Strap 010-02240-02
For a more feminine look, this Vivomove Style model with the golden tone case is an attractive and practical option. This model offers health and fitness tracking and will measure body energy, stress levels, heart rate and sleep monitoring over the course of the day. When connected to a smartphone, this watch can display upcoming calendar events and make quick payments using Garmin Pay. With a range of interchangeable Quick Release Straps, which will all nicely complement the gold tone of the case, this watch can be personalised and adjusted to match any outfit for any occasion. The watch comes fitted with a pin woven strap that fastens with a gold pin buckle.
Garmin Titanium Bracelet Strap Only QuickFit 22mm 010-12740-02
Garmin are often associated with being practical and robust. However, they can be worn for all occasions. This titanium strap will add an elegant and smart touch to any 22mm QuickFit compatible Garmin model. The dark shade of titanium will complement any outfit and add a formal edge to a tough Garmin model.
Garmin Gray Suede With Rose Gold Buckle Strap Only 20mm 010-12691-07
For a chic, more feminine touch, this suede strap will match any 20mm compatible Garmin watch. The strap is a soft shade of grey with a rose gold buckle for a modern take on a classic style. This band will add a touch of class to any Garmin watch, making it suitable for formal occasions.
Garmin Flame Red Rubber Strap Only QuickFit 26mm 010-12517-02
This flame red strap will make a statement when compared with any 26mm QuickFit Garmin model. It is robust and sturdy and will wear comfortably on the wrist. The bright colour will add a bold and eye-catching finish to the watch it is paired with. This strap would be the perfect addition for the sports enthusiast who likes to vary their look frequently.
What are your thoughts on our guide on how to change a Garmin watch strap? Will you be changing yours for a new one? Let us know in the comments below!
